Maximizing distance and making it easy to hit were the primary objectives in the G730, our longest and most forgiving iron to date. Typical distance gains of approximately five yards are generated from the flexing, hyper 17-4 stainless steel face. It’s not just distance but distance with max height and increased forgiveness for shots that hit and hold the green.
FEATURES
- Powerful Sound
The cavity-back design is supplemented with the proven PurFlex cavity badge that enhances feel and produces a more powerful sound. Multiple flex zones allow for more free bending to increase ball speed across the face for longer results. - Flexing Face
By employing hyper 17-4 stainless steel through heat treating, we thinned the face and optimized its overall structure to increase flexing and help lower the CG, delivering higher-launching shots with ball-speed gains and approximately five more yards of distance. - Extreme Forgiveness
The bigger head, more offset and wider sole in the investment-cast design increase the MOI in both axes, elevating forgiveness for improved stability and accuracy in this premium game-improvement design. - Full-Set Performance
G730 is available in 5 through 9 iron, pitching wedge, U-wedge, 50° and 56° wedges. The four wedges feature machined faces and grooves for added control and consistent results from all conditions. - Distance-Optimized Lofts
Custom-engineered lofts help increase distance with an eye toward optimizing gaps. The option of power and retro spec lofts allows fitters to further optimize performance. Tungsten toe screw and shaft tip weights allow for sw
SPECIFICATIONS
CLUB | LENGTH | LOFT | POWER SPEC LOFT | RETRO SPEC LOFT | LIE ANGLE | OFFSET | BOUNCE | SWINGWEIGHT |
---|---|---|---|---|---|---|---|---|
5-iron | 38 1/2″1/2 | 21.5°degrees | 20.0°degrees | 23.5°degrees | 61.0°degrees | 0.26″Ping.Clubs.Specs.Offset.Units | 6.0°degrees | D0 |
6-iron | 37 3/4″3/4 | 24.5°degrees | 23.0°degrees | 26.5°degrees | 61.5°degrees | 0.23″Ping.Clubs.Specs.Offset.Units | 7.0°degrees | D0 |
7-iron | 37″ | 28.0°degrees | 26.5°degrees | 30.0°degrees | 62.0°degrees | 0.20″Ping.Clubs.Specs.Offset.Units | 8.0°degrees | D0 |
8-iron | 36 1/2″1/2 | 32.0°degrees | 30.5°degrees | 33.5°degrees | 62.8°degrees | 0.18″Ping.Clubs.Specs.Offset.Units | 9.0°degrees | D0 |
9-iron | 36″ | 36.0°degrees | 35.0°degrees | 37.0°degrees | 63.5°degrees | 0.15″Ping.Clubs.Specs.Offset.Units | 9.5°degrees | D0.5 |
W | 35 1/2″1/2 | 40.0°degrees | 40.0°degrees | 40.5°degrees | 64.1°degrees | 0.12″Ping.Clubs.Specs.Offset.Units | 9.5°degrees | D2 |
U | 35 1/2″1/2 | 45.0°degrees | 45.0°degrees | 45.0°degrees | 64.1°degrees | 0.11″Ping.Clubs.Specs.Offset.Units | 11.0°degrees | D2 |
50 | 35 1/2″1/2 | 50.0°degrees | 50.0°degrees | 50.0°degrees | 64.4°degrees | 0.11″Ping.Clubs.Specs.Offset.Units | 12.0°degrees | D2 |
56 | 35 1/4″1/4 | 56.0°degrees | 56.0°degrees | 56.0°degrees | 64.4°degrees | 0.09″Ping.Clubs.Specs.Offset.Units | 12.0°degrees | D3 |
NOTES
- These are design specifications that may vary due to manufacturing tolerances.
- Lie angle is based on Black Color Code at standard length.
- Power Spec Loft is a fitting option for players looking to boost their iron distance or decrease spin to hit a desired trajectory window. This custom-designed loft configuration delivers a calculated power boost without sacrificing the integrity of the club’s design.
- Club bounce angles will vary slightly if ordered with non-standard loft specs.
- Standard swingweights for graphite-shafted clubs are 2 to 3 points lighter than shown, depending on shaft flex.
- Standard swingweights with Alta Distanza graphite shaft clubs are 2 to 5 points lighter than shown from – longer clubs are lighter.
- Achievable swingweights depend on shaft, length and grip combinations.
- Available in left- and right-handed models.
SHAFTS
PING offers a variety of shaft flexes in steel and graphite to meet your needs and preferences. Selecting the proper shaft flex for your swing will help you get the most distance and accuracy from every shot. Generally, players with faster swing speeds require stiffer shafts to keep the ball trajectory lower, while players with slower swing speeds will require more-flexible shafts to produce a higher ball trajectory.
The choice of steel or graphite shafts is usually based on preferences for weight and/or feel. Players seeking a lighter overall weight and/or a softer feel in their irons may prefer graphite shafts, while players who prefer a standard-weight club with a firmer feel may prefer steel shafts.
We recommend that you get fit for the shaft that allows you to play your best golf. Whether that’s a softer, lighter shaft with a higher launch or a heavier, stiffer shaft with a lower trajectory, a PING Certified Club Fitter can help you find the shaft that brings consistency to your game.
SHAFT | FLEX | WEIGHT | LAUNCH ANGLE |
---|---|---|---|
True Temper Dynamic Gold Mid 100
|
R300 | 105.0gPing.Clubs.Specs.Weight.Units | Mid |
S300 | 105.0gPing.Clubs.Specs.Weight.Units | Mid | |
True Temper Dynamic Gold Mid 115
|
S300 | 115.0gPing.Clubs.Specs.Weight.Units | Mid |
X100 | 116.0gPing.Clubs.Specs.Weight.Units | Mid | |
PING AWT 2.0
|
Regular | 98.0gPing.Clubs.Specs.Weight.Units | Mid High |
Stiff | 104.0gPing.Clubs.Specs.Weight.Units | Mid | |
X-Stiff | 119.0gPing.Clubs.Specs.Weight.Units | Low Mid | |
PING ALTA CB Black
|
Soft Regular | 65.0gPing.Clubs.Specs.Weight.Units | High |
Regular | 72.0gPing.Clubs.Specs.Weight.Units | Mid High | |
Stiff | 82.0gPing.Clubs.Specs.Weight.Units | Mid | |
True Temper Dynamic Gold
|
S300 | 124.0gPing.Clubs.Specs.Weight.Units | Low Mid |
X100 | 124.0gPing.Clubs.Specs.Weight.Units | Low | |
True Temper Dynamic Gold 105
|
R300 | 95.0gPing.Clubs.Specs.Weight.Units | Mid |
S300 | 97.0gPing.Clubs.Specs.Weight.Units | Mid | |
True Temper Dynamic Gold 120
|
S300 | 112.0gPing.Clubs.Specs.Weight.Units | Mid |
X100 | 114.0gPing.Clubs.Specs.Weight.Units | Mid | |
True Temper Elevate MPH 95
|
Regular | 93.0gPing.Clubs.Specs.Weight.Units | High |
Stiff | 94.0gPing.Clubs.Specs.Weight.Units | High | |
KBS Tour
|
Regular | 104.0gPing.Clubs.Specs.Weight.Units | Mid |
Stiff | 114.0gPing.Clubs.Specs.Weight.Units | Mid | |
X-Stiff | 124.0gPing.Clubs.Specs.Weight.Units | Low Mid | |
Nippon N.S. Pro Modus 3 105
|
Regular | 103.0gPing.Clubs.Specs.Weight.Units | Mid High |
Stiff | 106.0gPing.Clubs.Specs.Weight.Units | Mid High | |
X-Stiff | 112.0gPing.Clubs.Specs.Weight.Units | Mid High | |
UST Recoil Dart
|
65A (F2) | 61.0gPing.Clubs.Specs.Weight.Units | Mid |
75R (F3) | 72.0gPing.Clubs.Specs.Weight.Units | Mid | |
75S (F4) | 78.0gPing.Clubs.Specs.Weight.Units | Mid | |
PING ALTA Quick
|
35 | 38.0gPing.Clubs.Specs.Weight.Units | High |
45 | 41.0gPing.Clubs.Specs.Weight.Units | High |
NOTES
- Shaft weights listed are based on the trimmed length of a 7-iron and may not match the specs on the shaft manufacturer’s websites.