Mizuno T24 Wedge White Satin Steel Shaft

Our craftsman’s re-work of Mizuno’s prolific T-Series wedge, with subtle top-line refinements visible from the playing position. Grain Flow Forged in Hiroshima Japan, to ensure precise shaping and an unrivalled touch around the green. Now with higher spinning QUADCUT+ grooves and five unique sole profiles.

FEATURES

• FORGED IN HIROSHIMA JAPAN
  One-piece Grain Flow Forged HD Boron in Hiroshima, Japan – where Mizuno irons have been produced since 1968.

• QUADCUT+ GROOVES
  An adjustment of the groove shoulder camber and the taper of the groove profile allows a tighter groove pattern for increased spin rates on all shots.

• CRAFTSMAN REFINED TOPLINE
  Mass taken from the toe portion, and a lower hosel blend creates a smaller profile without loss of effective hitting area.

• WET WEATHER PERFORMANCE
  Mizuno’s HydroFlow Micro Grooves are laser etched to release moisture and reduce spin drop-off.

• WRAP-AROUND SOLE RELIEF
  Increased sole relief to heel and toe across all 5 grind options.

• LOFT SPECIFIC PROFILE
  Straight leading edge on lower lofts (to 51), into traditional teardrop, and more rounded lob wedges (58 and above).

• SPIN-WEIGHTED BLADE DESIGN
  A flared upper portion of the blade creates higher spin and penetrating trajectory – particularly from strikes high on the clubface.

• THREE FINISH OPTIONS
  Soft White Satin (with copper underlay), Denim Copper and Tour Raw

PRODUCT VIDEO

Mizuno T24 Wedge Product Video

SPECIFICATIONS

T24 PITCHING WEDGES SPECIFICATIONS

Club #	Loft °	Lie Angle	UN Length	60° Length	Bounce	Profile
46/08	46	63	35.5″	35.75″	8	S
48/10	48	63	35.5″	35.75″	10	S

Dexterity: RH Only

T24 GAP WEDGES SPECIFICATIONS

Club #	Loft °	Lie Angle	UN Length	60° Length	Bounce	Profile
50/08	50	63	35.25″	35.5″	8	S
52/10	52	63	35.25″	35.5″	10	S

Dexterity: RH & LH (white satin only)

T24 SAND WEDGES SPECIFICATIONS

Club #	Loft °	Lie Angle	UN Length	60° Length	Bounce	Profile
54/08	54	63	35.25″	35.5″	8	D
54/10	54	63	35.25″	35.5″	10	S
56/06	56	63	35.25″	35.5″	6	C
56/08	56	63	35.25″	35.5″	8	V
56/10	56	63	35.25″	35.5″	10	D
56/12	56	63	35.25″	35.5″	12	S

Dexterity: RH & LH (white satin only)

T24 LOB WEDGES SPECIFICATIONS

Club #	Loft °	Lie Angle	UN Length	60° Length	Bounce	Profile
58/04	58	63	35.25″	35.5″	4	X
58/08	58	63	35.25″	35.5″	8	C
58/10	58	63	35.25″	35.5″	10	V
58/12	58	63	35.25″	35.5″	12	D
60/06	60	63	35.25″	35.5″	6	X
60/10	60	63	35.25″	35.5″	10	C
60/12	60	63	35.25″	35.5″	12	V

Dexterity: RH & LH (white satin only)